
Click Here to Show the Entire Article
Availability | Important Notes| List of resolved issues | Installation instructions | Uninstall instructions | Revision History
R80 and R80.10 reached their End of Support
For more info on all Check Point releases, refer to Release map and Release Terminology articles.
Introduction
R80.10 Jumbo Hotfix Accumulator is an accumulation of stability and quality fixes resolving multiple issues in different products.
Supported products and configurations
The Jumbo Hotfix Accumulator supports these products and configurations: Security Gateway, StandAlone, Security Management Server, Multi-Domain Management Server, Log Server, Multi-Domain Log Server, SmartEvent Server, Endpoint Security Server, VSX, Cluster and CloudGuard / vSEC for AWS, Microsoft Azure and Google Cloud (see sk109141).
- Install this Jumbo Hotfix Accumulator only after you successfully complete the Gaia First Time Configuration Wizard and reboot.
- Check Point recommends installing Jumbo Hotfix Accumulator on all R80.10 devices.
- For CPUSE installation, use the latest Deployment Agent build (refer to sk92449).
For Check Point Appliances
Jumbo Hotfix Accumulator FAQ | Releases Terminology | Jumbo Hotfix Takes Compatibility
Availability
R80.10 image Take 479 can be installed with R80.10 Jumbo Hotfix Accumulator Take 154 and higher.
R80.10 image Take 462 can be installed with R80.10 Jumbo Hotfix Accumulator Take 70 and higher.
R80.10 image Take 421 can be installed with any released R80.10 Jumbo Hotfix Accumulator Take.
Take 298 | Take 290 | Take 288 | Take 287 | Take 283
Important Notes
- Starting from Take 275, clients that do not support MFA (such as Mac OS and iOS) cannot connect as Remote Access clients if MFA is enabled.
- If you use a cluster with enabled Identity Awareness, refer to sk170516 after the first installation of Jumbo Hotfix to avoid unexpected behavior with Identity Awareness.
List of Resolved issues and New Features per HotFix Take
Installation Instructions
Procedure:
-
Show / Hide instructions for installation in Gaia Portal - using CPUSE (Check Point Update Service Engine)
-
Offline installation
Note: Either get the offline package from Check Point Support, or export the package from a source Gaia machine, on which this package was already downloaded / installed (for package export instructions, refer to sk92449 - section "(4-D) "How to ..."").
- Install the latest build of CPUSE Agent from sk92449.
- Connect to the Gaia Portal on your Check Point machine and navigate to Upgrades (CPUSE) section - click on Status and Actions.
- In the upper right corner, click on the Import Package button.
- In the Import Package window, click on Browse... - select the CPUSE package (either offline TGZ file, or exported TAR file) - click on Import.
- Above the list of all software packages, click on the Showing Recommended packages button - select All.
- Select the imported package Check Point R80.10 Jumbo hotfix T<number> for sk116380 - click on More button on the toolbar - click on Verifier (or right-click on the package and click on Verifier).
- Select this package and click on Install Update button on the toolbar.
-
Show / Hide instructions for installation in Gaia Clish - using CPUSE (Check Point Update Service Engine)
For detailed installation instructions, refer to CPUSE - Gaia Software Updates (including Gaia Software Updates Agent) - section "(4) How to work with CPUSE".
-
Offline installation
Note: Either get the offline package from Check Point Support, or export the package from a source Gaia machine, on which this package was already downloaded / installed (for package export instructions, refer to sk92449 - section "(4-D) "How to ..."").
- Install the latest build of CPUSE Agent from sk92449.
- Connect to command line on target Gaia OS.
- Log in to Clish.
- Acquire the lock over Gaia configuration database:
HostName:0> lock database override
- Import the package from the hard disk:
HostName:0> installer import local <Full_Path>/<Package_File_Name>.TGZ_or_TAR
- Show the imported packages:
Note: Refer to the top section "Hotfixes" - refer to "Check Point R80.10 Jumbo hotfix T<number> for sk116380"
HostName:0> show installer packages imported
- Verify that this R80 Jumbo Hotfix Accumulator package can be installed without conflicts:
HostName:0> installer verify <Package_Number>
- Install the imported package:
HostName:0> installer install <Package_Number>
Uninstall Instructions
Important Note: This Jumbo Hotfix Accumulator removes all its packages during uninstall.
Procedure:
-
Show / Hide instructions for uninstall in Gaia Portal - using CPUSE (Check Point Update Service Engine)
- CPUSE Software Updates Policy should be configured to allow self-update of CPUSE Agent.
Otherwise (and if this machine is offline), users should manually install the latest build of CPUSE Agent from sk92449.
- Connect to the Gaia Portal on your Gaia machine and navigate to the 'Upgrades (CPUSE)' section - click on 'Status and Actions'.
- Above the list of all software packages, click on the 'Showing Recommended packages' button - select 'All'.
- Right-click on the Jumbo Hotfix Accumulator package - click on 'Uninstall'.
- A warning will be displayed that after this uninstall, the machine will be automatically rebooted.
Click on 'OK' to start the uninstall.
-
Revision History